The versatile appearance, size and shape of aluminium doors contribute to their growing popularity, making them an ideal choice for both homeowners and builders. 

However, to take advantage of all the benefits of aluminium doors, their installation must be carried out with extreme care and precision. 

So, let us dive into the details of installing aluminium doors through this comprehensive guide which covers every aspect, from preparation to post-installation tips. 

Installation of Aluminium Doors: How to Do it Correctly? 

Tools Required for Aluminium Door Install Process 

• Measuring tape 

• Fastening and fixing tools, including pliers, a wrench and a screwdriver 

• Hinges and anchor bolts 

• Shim kit 

• Sealants and adhesive tools 

• Protective equipment, such as safety glasses, gloves and dust mask 

• Door handles and locks 

Pre-Installation Steps 

Before beginning your aluminium door install process, you need to follow the below-written steps to ensure a successful outcome: 

1. Measure the door width, height and thickness to ensure that it matches the wall opening. 

2. Inspect the site for possible hazards. 

3. Gather the tools and equipment needed for the installation, such as seals, fasteners, weather-stripping, safety gear, etc. 

Aluminium Door Install Process 

1. Removing the Old Door 

• Start by removing the door hardware, including hinges, handles and locks. 

• Remove screws and clip holding the door leaf. 

• Pry and lift the door leaf from the frame and set it aside. 

• Remove screws connecting the door frame with the wall. 

• Remove the frame from the wall. 

• Knock off old plaster, nails and soundproofing. 

2. Preparing the Door Opening 

• Clean the debris and dust present on the opening. 

• Check for signs of damage and repair the damaged area with appropriate products. 

• Level the surface. 

3. Assembling the Door Frame 

• Mark screw holes and hinge locations on the frame. 

• Secure the hinges using screws and bolts. 

• Adjust hinges by attaching a door leaf to the frame (temporarily). 

• Install and secure locksets, knobs and handles using fasteners. 

4. Securing the Door Frame 

• Check door frame alignment with the door opening. 

• Level the door frame with the wall. 

• Adjust shims and screws to secure the door frame properly. 

• Double-check the horizontal and vertical alignment. 

• Once the frame is aligned, tighten the bolts. 

5. Installing Door Leaves 

• Lift and position the door leaves into the frame. 

• Place wedges around the entire perimeter. 

• Align the door leaves with the position of the frame's hinges. 

• Loosen the hinge screws to secure the leaves to the frame. 

• Check door leaf movement and adjust the hinges. 

• Tighten the screws firmly for smooth operation. 

• Inspect door leaf alignment again and ensure even spacing between the door leaves if there are double doors. 

6. Applying Seals 

• Look for gaps present between the frame and walls, if any. 

• Apply door seals and weatherproofing materials, such as a weatherproofing strip or spray foam. 

• Test the door for smooth operation and secure closure by opening and closing the door multiple times. 

7. Test and Adjust the Door 

• Check the door for squeaks or binding. 

• Adjust hinges for proper alignment, if required. 

• Test the locking mechanisms of the door for secure closure. 

Post-Installation Tips 

To ensure smooth and optimal performance, enhance safety and security and reduce maintenance costs, perform the following post-installation activities: 

• Lubricate the hinges, locks, tracks and rollers of the door every 6-7 months. 

• Weatherstrip the door to prevent air leaks and water intrusion. 

• Clean the door with mild soap and water periodically. 

• Inspect the door for wear and tear and replace the hardware as required. 

• Install door stops or holders to prevent door damage. 

Wrapping Up 

Investing time and effort in the aluminium door install process yields successful results and long-term benefits. As installing this type of door requires knowledge, planning and precise execution, it is important that you follow this comprehensive guide to guarantee a seamless installation. 

By doing so, you can fully utilise the potential of aluminium doors and enjoy flawless door functionality. However, if you want a hassle-free installation, consider AIS Glasxperts- a leading integrated glass solutions company. 

By choosing AIS Glasxperts, you can get 360º assistance, from expert guidance and installation to post-installation support. 

Connect with us at +91-8800392020 or contact@glasxperts.com and experience the convenience of a single-point solution studded with expert consultation.